If you have a clogged shower faucet, don’t panic! Clogged shower faucets are common, but there are also a few things you should know if this occurs. Luckily, most replacements are quick, easy, and affordable. Still, you need to know what you’re doing, not to cause more damage than you do good.


When your shower faucet gets clogged, it ultimately impacts your shower pressure. That’s why it’s essential to fix this problem ASAP if you don’t want it to affect your daily life. Let’s discuss everything you need to know about a clogged shower faucet.


What Causes a Shower Head to Clog?


Generally, shower clogging results in the build-up of dirt and debris. This is even worse when homeowners have a hard water supply that leaves behind mineral deposits. While it might be tempting to clean your shower head with soap, this can leave behind even more residue that worsens the clog.


Unfortunately, clogs in your shower faucet will obstruct the water passage, eventually leading to a complete blockage. That’s why it’s imperative to clear out the clog and replace the faucet, if necessary. This can help you avoid a more significant problem down the road. It’s essential to get the right repair jobs. Look for the common symptoms behind faucet blockage. Let’s go over a step-by-step process to help you clear your shower faucet quickly and effectively.


How Do I Replace a Blocked Shower Faucet?


Are you coming across reduced water flow in your shower? That’s a common symptom of a clogged valve. Mineral deposits and other debris restrict the fixtures from operating correctly. This lack of efficiency will lead to excessive energy usage, and water waste as the shower will work harder to flow. Here is how to replace your faucet:


Step 1


You have to cover the whole tub drain using a rag so that no dropped parts will fall inside the drain. This will make the process easy and efficient.


Step 2


It’s time to unscrew the handle. You must use a screwdriver or wrench to remove the handle and plate to replace the entire mechanism. If you are just replacing your shower year, use a wrench to do so.


Step 3


The next step is to close the cold and hot water valves and shut off the faucet from the main valve to ensure no leaks.


Step 4


Now using the tip of your screwdriver, pry the retainer clip carefully from the shower faucet.  Be careful not to break anything during this step.


Step 5


Don’t forget to install the plastic shield under the valve, as it helps catch the water. Use pliers to pull out the damaged shower faucet.


Step 6


Smear some waterproof grease over the o-rings for better efficiency and on the inside of the new faucet head.


Step 7


Push the new cartridge inside the shower faucet. Make sure you place the cold and hot water detectors in the right direction.


Step 8


Next, press the clip securely into the faucet to protect the cartridge.


Step 9


Open the shutoff valves to check the flow of water.


Step 10


Lastly, reinstall the whole handle and surrounding plate. Now, the process is complete!


Contact a Reliable Plumber for Your Drain Cleaning Needs


If you have an issue with clogged drains, it’s vital to contact a professional plumber immediately for help. Contact your local Pasadena drain cleaning service to schedule an appointment.


Leave a Reply

Your email address will not be published. Required fields are marked *