Water Heater Problems

What should you do if you have a water heater problem? If the water is not hot, has a smell, or is rust-colored, you may want to take a look at your thermostat. A simple fix may be to adjust the thermostat to the temperature you want. If the thermostat is tripping or is defective, you should consider replacing the unit. Plumber near you

No hot water

A water heater problem can affect your home’s energy efficiency. It could also cause a fire if the wiring is defective or frayed. Before you attempt to fix the problem, you should turn off the electric unit and wait at least half an hour. If that doesn’t work, try other solutions.

If you have a gas-fired water heater, you may have a leak in the supply line or a broken valve. It may be necessary to relight the gas valve. If you can’t find the culprit, you can try replacing the water heater.

Rust-colored water

Rust-colored water in your water heater may be a sign that your water heater is having problems. This is bad news because rust-colored water can make household chores impossible and can even affect the taste of your dishes. You may want to consult a plumbing professional to determine the cause.

A number of factors can cause your water to appear rust-colored, including a buildup of bacteria. This could be a result of a corroded water main, or it could be from mineral deposits in your water supply. In many cases, this problem can be solved by replacing aging plumbing.

Smelly hot water

If your hot water is smelling, there may be a few possible causes. First of all, you should check your water quality. It should be above 2.0 parts per million (ppm). If it is lower, contact the county health department or your water supply authority. Running a faucet for a few minutes can also help eliminate the odor.

Another likely cause of smelly hot water is sediment buildup. This sediment forms on the inner tank liner and internal components of the water heater. If not cleaned regularly, it can damage the tank’s liner and lead to a bad smell.

Leaky water

Leaky water heater problems can result from a number of different causes. Usually, leaks occur around the temperature and pressure relief valve, located on the side of the water tank. The valve should be covered by a copper tube that extends a few inches and then turns downward toward the floor. Checking the leak over a couple of days may be enough to confirm its cause.

Leaks in the tank may originate from a variety of sources, including loose T&P valves, cracked anode rods, or corroded or damaged connections to the water supply. While tightening these components may be enough to fix a small leak, if it persists, you may need to replace the water heater.

Too hot water

Water heater problems are common, but there are several things you can do to fix them before they become worse. The first and most obvious fix is to adjust the thermostat. If it is set too high, it will likely cause the water to get too hot. Another option is to replace the thermostat. A faulty temperature pressure valve is another cause of too hot water. This valve is an area of concern and should be checked immediately. Faulty heating elements and sediment buildup on the heating element are also common causes.

Another common cause of too hot water is a malfunctioning thermostat. If the thermostat is set too high, the water will be too hot and can cause serious burns, especially if you are using it with a young child. A malfunctioning water heater can also cause leaks and bursts in the tank.